3D-Measurements of 3D-Deformations of Pantographic Structures

Authors

  • G. Ganzosch
  • K. Hoschke
  • T. Lekszycki
  • I. Giorgio
  • E. Turco
  • W. H. Müller

DOI:

https://doi.org/10.24352/UB.OVGU-2018-031

Abstract

Samples of differently sized so-called pantographic structures are subjected to large deformation loading tests up to rupture, while their response to the deformation is recorded by an optical 3D-measurement system. Digital
image correlation is used to calculate the deformation that took place perpendicular to the reference plane by the help of a four-camera system. Results show that the deformation behavior is strongly non-linear and that the
structures are capable to perform large (elastic) deformations without leading to complete failure.

Downloads

Published

2019-03-21

How to Cite

Ganzosch, G. (2019) “3D-Measurements of 3D-Deformations of Pantographic Structures”, Technische Mechanik - European Journal of Engineering Mechanics, 38(3), pp. 233–245. doi: 10.24352/UB.OVGU-2018-031.

Issue

Section

Article

Most read articles by the same author(s)